SUPPORT

Freesat is a free to air subscription free service which provides you with access to the nations favourite selection of TV channels. To access this service, you are required to have a satellite dish installed at your home.

There are over 200 channels available for you to select including 15 in stunning HD. To view the entire range of channels please click here: https://www.freesat.co.uk/whats/full-channel-list/

Out of the box this product is unfortunately not be able to record, however you can connect an external HDD to the device to enable this feature. If you are doing so, please be careful to make sure your external HDD meets the below specifications:

• Externally Powered
• USB 2.0 or USB 3.0
• Between 80GB – 2TB

With an external HDD connected you will be able to either record or watch one channel at a time.

x1 Remote control

x1 HDMI cable

x1 Ethernet cable

x1 Power Supply

x1 Quick Start Guide

If you were a standard Sky+ customer, you will be able to use your existing Sky dish. If you are a Sky Q customer unfortunately your dish is not compatible.

Only one satellite cable is required.

The HB-1100s does offer the ability to connect to WiFi.

At the top of your remote you will see two buttons labelled TV & STB, please press the STB button and then attempt to control the HB-1100S.

If you are switching between channels and notice SD is louder than HD or vice versa making the below adjustment should fix the issue:

Press Home

Select Settings

Select Picture & Audio

Ensure the Digital Audio Output to Stereo

BBC iPlayer, ITV Hub, Demand5, BBC Sport, Netflix (subscription required), UKTV Play, TVPlayer, France24, Youtube, Rakuten TV (subscription required), STV Player, BBC News, Ketchup and Pop Fun.

Unfortunately, on the 22nd of February 2018 Channel 4 made the decision to remove the Channel 4 HD and All4 On Demand services from the Freesat service. For more information, please contact Freesat or Channel 4 directly.

Catch-Up TV is indeed available and can be accessed directly via the EPG, we also have a dedicated Showcase section to highlight he best programmes available on Catch-Up this week.

Due to copyright legislation this is not possible.

You can yes, this can be accessed via the HB by either USB or DLNA.

Your remote can be programmed to control the HB, once the programming has been completed you need to use the STB & TV buttons at the top of your remote to control either the television or your set-top box.

The default option for the guide will always list both SD and HD channels, you can press the List button to look at specific genres within the EPG.

You can use the fast-forward and rewind buttons to go forward or back by 24 hours. The EPG can go up to 7 days ahead.

You can use the Search button on the remote to enable you to search programs both on live TV and On Demand.

You’re able to use the left directional button to go backwards on certain channels to catch up on content you’ve missed – a broadband connection is required for this.

If there are any channel changes to the Freesat service your device will normally automatically update to reflect the changes, though if this has not happened for any reason you can follow the below steps to re-tune:

Press the Home button on your Remote and select Settings

Access Page 2 and select Freesat Channels (three right directional arrow presses when in Settings)

Select Channel Search

Follow the On-Screen prompts until your satellite cables have been detected and postcode verified

Save the results

To create your Favorites channel list you will need to follow the steps below:

Press the Home button and select Settings

Access Page 2 and select Freesat Channels (three right directional arrow presses when in Settings)

Select Favorite channels followed by Edit favorite channels

Select Channels you wish to add and press Back to save

When you would like to view your Favorite channels, Open the EPG using the TV Guide button, press the List button and Select Favorites

Software updates for the HB-1100s are done automatically via your satellite connection.

Please follow these steps to check your current software version

Press the Home button and select Settings

Select System Information

Compare the software version to the version listed on our website: https://uk.humaxdigital.com/support/?product_id=3534&curr_page=sw_release